Editing a Recorded MiniDisc (continued)

Advanced Features

Editing a Recorded MiniDisc-

 

-

38

To move a track

1Play the track to be moved, and press the PLAY/PAUSE button.

2Press the EDIT button repeatedly to select "MOVE".

3Press the ENTER/SYNC button.

To cancel the operation, press the /:OFF button.

4Press the or button to select the di- rection.

5Press the ENTER/SYNC button again.

The track will be moved, and the unit will be paused at the beginning of the track.

When a track has a name before dividing:

The two new tracks will have the same name. However, in the TOC FULL condition, the second track may not be named.

Total number of tracks that can be divided:

Each disc can hold up to 255 tracks. However, even if the number of assigned tracks has not reached 254, it might not be possible to make any further divisions of tracks.

To combine two non-adjacent tracks:

First, put the two tracks next to each other in the order you want using the MOVE function. Then combine them using the COMBINE function.

When one or both tracks to be combined have a name:

The first track name will be used. However, when the first track does not have a name, the second track name will be used.

In the following cases, tracks may not be com- bined.

zDigital recorded track and analog recorded track.

zLong play recorded track and stereo recorded track.

zTracks whose recording time is less than 12 seconds.

00/12/26 90SEC_31_39.fm

Page 38
Image 38
Sharp MD-MT90 operation manual „ To move a track