Useful Features -Checking Displays | Sharp MD-MT90 specification

„ To display the playing time of an indi-

„ Checking the remaining amount of bat-

vidual track

tery level

The remaining amount of battery level is shown by the

1 While in the stop mode, press the or

battery indicator ( ) during operation.

button to display the track number and

track name.

	2 Press the DISP button to display the play-							z When the battery is completely discharged, the bat-
	ing time for that track.							tery indicator		will flash. Recharge the battery or
	ing time for that track.							replace the alkaline battery with a new one.
								replace the alkaline battery with a new one.
								z When the battery has run completely out, "BATT
								EMPTY" will appear. Then, the power will be discon-
								nected automatically.
								Notes:
								Notes:
	Each time the		or	button is pressed, the playing				z If you use	the	battery which you stopped charging
	Each time the		or	button is pressed, the playing				halfway, "	"	may appear. It does not mean that the
	time of the previous or next track will be displayed.							halfway, "	"	may appear. It does not mean that the
	time of the previous or next track will be displayed.							battery is completely charged.
								battery is completely charged.
								z The battery indicator will not correctly display the
								remaining capacity for approximately 10 seconds after
								the power has been turned on.
								z When the AC adaptor or a separately available car
								adaptor is used, the battery indicator will not be
								shown.
								z The number of bars shown in the battery indicator may
								increase or decrease, depending on the operation
								being performed. This is normal.

Useful Features -Checking Displays-

27

00/12/26 90SEC_16_30.fm

Image 27

Sharp MD-MT90 Useful Features -Checking Displays, While in the stop mode, press the or, Ing time for that track

Contents

Thank you for purchasing this Sharp product MD-MT90 Accessories Optional accessoriesAD-N70BT x Contents Special Notes Special Notes Important Introduction Names of Controls and Indicators Important Introduction -Names of Controls and Indicators„ Main unit „ Display panel „ Remote control unit „ Important PrecautionsPrecautions Avoid using or leaving the unit in the following places Inserting a MiniDisc Inserting a MiniDisc Connections Connections Preparation Digital recording RecordingBasic Operation -Recording Analog recording To update the recorded contents of the MiniDisc To stop recordingAbout the TOC Basic Operation -Playback Playback To interrupt playback „ Volume controlTo turn off the power „ Bass control „ To locate the beginning of a track Useful Features -Advanced PlaybackAdvanced Playback „ To locate the desired portion To return to normal playback „ To play at double speed„ Random play or repeat play To interrupt fast playback Press the ENTER/SYNC button Useful Features -Advanced RecordingAdvanced Recording „ Playback sound-actuated recording „ Long-play recording Press the MODE/CHRG button while the recording is pausedStart recording „ To start recording from the middle of a Track Advanced Recording Press the Edit button „ Helpful tip when attaching a label„ To create your own track numbers „ Recording tracks as a single track Useful -Advanced „ About track numbersRecording „ About sampling rate converter „ To record from a microphone Useful Features -Recording from a MicrophoneTo write recorded contents on the MiniDisc Recording from a Microphone „ Sound-actuated recording Mic Syn- chronized recording Recording from a Microphone Creating track numbers manually „ Track intervalsDuring a mic manual recording During a mic synchro recording Checking Displays Features While in the stop mode, press the or Useful Features -Checking DisplaysRemaining amount of battery level is shown by Battery indicator during operation Insert the rechargeable battery Battery PowerUseful Features -Battery Power „ Charging the rechargeable battery „ About charging time „ Using with the rechargeable or alkaline battery Hold Function To cancel the hold mode Changing Default Settings Changing Default Settings Titling a MiniDisc Titling a MiniDisc„ Creating disc and track names „ Characters symbols „ To erase a character„ To enter a space „ Stamping titles from another MiniDisc „ To add characters Master MiniDisc operation Insert a master MiniDisc „ To erase all of the tracks at once Editing a Recorded MiniDiscEditing a Recorded MiniDisc „ To erase tracks one at a time „ To combine tracks „ To divide a track „ To move a track Another System Listening through Another System„ Listening through a stereo system „ Listening through a car stereo Other Features and Caution „ Resuming auto play „ Rechargeable batteryReferences -Other Features and Caution MiniDisc System Limitations MiniDisc System Limitations Error Messages Error Messages Play MD Troubleshooting Troubleshooting „ If trouble occurs Maintenance„ Cleaning Maintenance Specifications Specifications„ General „ MiniDisc Recorder Sharp Electronics Corporation