Error Messages | Sharp MD-MT90 specification

References	-Error Messages-

42

Error Messages

ERROR MESSAGES	MEANING	REMEDY

BATT EMPTY	z The battery is run down.	z Charge the rechargeable battery or replace the al-
		kaline battery (or use the AC adaptor for power).

BLANK MD	z Nothing is recorded.	z Replace the disc with a recorded disc.

Can't COPY	z You tried to record from a copy prohibited	z Record using the analog cable.
	MiniDisc.

Can't EDIT	z A track cannot be edited.	z Change the stop position of the track and then edit it.

Can't READ (*)	z The disc data cannot be read because the	z Reload the disc.
	disc or unit is damaged.	z Replace it with another recorded disc.
		z Replace it with another recorded disc.

Can't REC	z Recording cannot be performed correctly	z Re-record or replace it with another recordable
	due to vibration or shock.	disc.

Can't STAMP	z Stamp function does not work.	z Check the number of tracks.

Can't WRITE	z Cannot save the TOC information correctly	z Replace the disc with another recordable disc.
	to a MiniDisc. (A large portion of the disc has
	been damaged.)

DEFECT	z The disc is scratched.	z If the sound you hear is not right, record again.
		z Replace the disc with another recordable disc.

DISC FULL	z The disc is out of recording space.	z Replace it with another recordable disc.

Er-MD (**)	z The microprocessor has reported a system	z To have it repaired, go to the distributor where you
	fault and the unit is out of order.	purchased the unit.

HOLD	z The unit is in the hold mode.	z Cancel the hold mode.

LOCKED	z You removed a MiniDisc while recording or	z Turn off the power and remove the MiniDisc.
	editing.

NO DISC	z A disc has not been loaded.	z Load a disc.

Number or symbol appears in (*) position.

00/12/26 90SEC_40_47.fm

Image 42

Sharp MD-MT90 operation manual Error Messages

Contents

MD-MT90 Thank you for purchasing this Sharp product Accessories Optional accessoriesAD-N70BT x Contents Special Notes Special Notes Important Introduction Names of Controls and Indicators Important Introduction -Names of Controls and Indicators„ Main unit „ Remote control unit „ Display panel Avoid using or leaving the unit in the following places PrecautionsPrecautions „ Important Inserting a MiniDisc Inserting a MiniDisc Connections Connections Preparation Analog recording RecordingBasic Operation -Recording Digital recording To update the recorded contents of the MiniDisc To stop recordingAbout the TOC Playback Basic Operation -Playback „ Bass control „ Volume controlTo turn off the power To interrupt playback „ To locate the desired portion Useful Features -Advanced PlaybackAdvanced Playback „ To locate the beginning of a track To interrupt fast playback „ To play at double speed„ Random play or repeat play To return to normal playback „ Playback sound-actuated recording Useful Features -Advanced RecordingAdvanced Recording Press the ENTER/SYNC button „ Long-play recording Press the MODE/CHRG button while the recording is pausedStart recording Advanced Recording „ To start recording from the middle of a Track „ Recording tracks as a single track „ Helpful tip when attaching a label„ To create your own track numbers Press the Edit button „ About sampling rate converter „ About track numbersRecording Useful -Advanced Recording from a Microphone Useful Features -Recording from a MicrophoneTo write recorded contents on the MiniDisc „ To record from a microphone Recording from a Microphone „ Sound-actuated recording Mic Syn- chronized recording During a mic synchro recording „ Track intervalsDuring a mic manual recording Creating track numbers manually Features Checking Displays Battery indicator during operation Useful Features -Checking DisplaysRemaining amount of battery level is shown by While in the stop mode, press the or „ Charging the rechargeable battery Battery PowerUseful Features -Battery Power Insert the rechargeable battery „ Using with the rechargeable or alkaline battery „ About charging time To cancel the hold mode Hold Function Changing Default Settings Changing Default Settings Titling a MiniDisc Titling a MiniDisc„ Creating disc and track names „ Characters symbols „ To erase a character„ To enter a space „ To add characters „ Stamping titles from another MiniDisc Master MiniDisc operation Insert a master MiniDisc „ To erase tracks one at a time Editing a Recorded MiniDiscEditing a Recorded MiniDisc „ To erase all of the tracks at once „ To divide a track „ To combine tracks „ To move a track „ Listening through a car stereo Listening through Another System„ Listening through a stereo system Another System Other Features and Caution „ Resuming auto play „ Rechargeable batteryReferences -Other Features and Caution MiniDisc System Limitations MiniDisc System Limitations Error Messages Error Messages Play MD Troubleshooting Troubleshooting Maintenance Maintenance„ Cleaning „ If trouble occurs Specifications Specifications„ General „ MiniDisc Recorder Sharp Electronics Corporation