Recording from a Microphone | Sharp MD-MT90 guide

Recording from a Microphone (continued)

Useful Features -Recording from a Microphone-

24

„Sound-actuated recording (Mic Syn- chronized recording)

1 Press the REC button.

2 Press the or button to adjust the re- cording level.

3 Press the ENTER/SYNC button to select the recording sensitivity.

MIC SYNC H : Recording starts when the unit detects --- 24 dB or more (The unit can start recording from quiet sounds).

MIC SYNC L : Recording starts when the unit detects --- 12 dB or more.

4 When a sound, such as person speaking, is picked up by the microphone, recording will begin automatically.

About the pause function

The unit automatically pauses when the microphone does not pick up any sound for 3 seconds or more. (The pause function does not work for approximately 10 seconds after a recording starts.) When the microphone picks up sound again, recording starts automatically.

Notes:

zWhile making a mic recording, do not connect any- thing to the OPTICAL/LINE IN jack on the portable MD.

zTo use a microphone, be sure it is a plug-in-power type microphone.

-When a plug-in-power type microphone is plugged in, the portable MD will provide power for the microphone's operation.

-If a different type of microphone is plugged in, it may not operate properly or it may cause the unit to malfunction.

zInsert the plug firmly. If you don't, the recording will not be made properly.

zUse a microphone with a 1/8" (3.5 mm) diameter stereo mini plug.

zIf the unit starts recording too often from low unwanted noises, set the microphone input to "MIC SYNC L".

zRecording sensitivity can be changed while recording.

00/12/26 90SEC_16_30.fm

Image 24

Sharp MD-MT90 operation manual Recording from a Microphone, „ Sound-actuated recording Mic Syn- chronized recording

Contents

MD-MT90 Thank you for purchasing this Sharp product Accessories Optional accessoriesAD-N70BT x Contents Special Notes Special Notes Important Introduction Names of Controls and Indicators Important Introduction -Names of Controls and Indicators„ Main unit „ Remote control unit „ Display panel Precautions PrecautionsAvoid using or leaving the unit in the following places „ Important Inserting a MiniDisc Inserting a MiniDisc Connections Connections Preparation Recording Basic Operation -RecordingAnalog recording Digital recording To update the recorded contents of the MiniDisc To stop recordingAbout the TOC Playback Basic Operation -Playback „ Volume control To turn off the power„ Bass control To interrupt playback Useful Features -Advanced Playback Advanced Playback„ To locate the desired portion „ To locate the beginning of a track „ To play at double speed „ Random play or repeat playTo interrupt fast playback To return to normal playback Useful Features -Advanced Recording Advanced Recording„ Playback sound-actuated recording Press the ENTER/SYNC button „ Long-play recording Press the MODE/CHRG button while the recording is pausedStart recording Advanced Recording „ To start recording from the middle of a Track „ Helpful tip when attaching a label „ To create your own track numbers„ Recording tracks as a single track Press the Edit button „ About track numbers Recording„ About sampling rate converter Useful -Advanced Useful Features -Recording from a Microphone To write recorded contents on the MiniDiscRecording from a Microphone „ To record from a microphone Recording from a Microphone „ Sound-actuated recording Mic Syn- chronized recording „ Track intervals During a mic manual recordingDuring a mic synchro recording Creating track numbers manually Features Checking Displays Useful Features -Checking Displays Remaining amount of battery level is shown byBattery indicator during operation While in the stop mode, press the or Battery Power Useful Features -Battery Power„ Charging the rechargeable battery Insert the rechargeable battery „ Using with the rechargeable or alkaline battery „ About charging time To cancel the hold mode Hold Function Changing Default Settings Changing Default Settings Titling a MiniDisc Titling a MiniDisc„ Creating disc and track names „ Characters symbols „ To erase a character„ To enter a space „ To add characters „ Stamping titles from another MiniDisc Master MiniDisc operation Insert a master MiniDisc Editing a Recorded MiniDisc Editing a Recorded MiniDisc„ To erase tracks one at a time „ To erase all of the tracks at once „ To divide a track „ To combine tracks „ To move a track Listening through Another System „ Listening through a stereo system„ Listening through a car stereo Another System Other Features and Caution „ Resuming auto play „ Rechargeable batteryReferences -Other Features and Caution MiniDisc System Limitations MiniDisc System Limitations Error Messages Error Messages Play MD Troubleshooting Troubleshooting Maintenance „ CleaningMaintenance „ If trouble occurs Specifications Specifications„ General „ MiniDisc Recorder Sharp Electronics Corporation