Using the “Options” Menu
You can use the “Options” menu to enhance the usage for the projector. For operation of the menu screen, see pages 32 to 35.
Example: “Options” menu screen for
INPUT 2
Lamp Timer (Life) (Check- | OSD Display (Setting On- |
ing the Lamp Life Status) | screen Display) |
You can confirm the cumulative lamp usage time | This function allows you to turn the |
and the remaining lamp life (percentage). | sages on or off. |
Display the “Options” menu to check the lamp life status.
Description of Lamp Life
Lamp usage condition | Remaining lamp life | |||
100% | 5% | |||
|
| |||
Used with only “ | ” |
| about | |
(Eco mode) in “Eco | 4,500 hours | 225 hours | ||
Mode” |
|
|
| |
Used with only “ | ” |
| about | |
(Standard mode) in | 3,000 hours | 150 hours | ||
“Eco Mode” |
|
|
| |
Select “
” (ON) or “
” (OFF) in “OSD Dis- play” on the “Options” menu.
Description of “OSD Display” Settings
Selectable settings | Description |
ON | All |
OFF | INPUT/VOLUME/AV MUTE/FREEZE/ |
| AUTO SYNC/ENLARGE/ “An invalid button |
| has been pressed.” / “All buttons on |
| Projector are locked.” are not displayed. |
|
|
Note
•It is recommended that the lamp be changed when the remaining lamp life becomes 5%. For lamp replacement, contact your nearest Sharp Authorized Projector Dealer or Service Center.
•The table above indicates rough estimates in the case of using only in each mode shown. Remain- ing lamp life changes within the range of the val-
ues shown depending on the frequency at which
“Eco Mode” is switched to “
” (Eco mode) and “
” (Standard mode) (see page 45).
44
A10X_A10S#E_Print#p40_50.p65 | 44 | 03.2.4, 2:06 PM |
