Sharp PG-C45X Projecting a Reversed/Inverted Image, Projection from behind the screen

Setup

Projecting a Reversed/Inverted Image

Projection from behind the screen

■Place a translucent screen between the projector and the au- dience.

■Reverse the image by setting “Rear” in “PRJ Mode”. See page 71 for use of this function.

Projection using a mirror

■Place a mirror (normal flat type) in front of the lens.

■Reverse the image by setting “Rear” in “PRJ Mode”, when the mirror is placed on the audience side. See page 71 for use of this function.

Info

•When using a mirror, be sure to carefully position both the pro- jector and the mirror so the light does not shine into the eyes of the audience.

Ceiling-mount setup

■It is recommended that you use the optional Sharp ceiling-mount bracket for this installation.

Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount bracket (sold separately.) (AN- XGCM55 ceiling-mount bracket, its AN-EP101B extension tube and AN-JT200 universal bracket, adaptor for non-level ceiling installation (for U.S.A.), BB-M20T ceiling adaptor, its BB- NVHOLDER280, BB-NVHOLDER550, BB-NVHOLDER900 ceiling mount systems (for GERMANY), or AN-60KT ceiling- mount bracket, its AN-TK301/AN-TK201 and AN-TK302/AN- TK202 extension tubes (for countries other than the U.S.A. and GERMANY))

■Be sure to adjust the position of the pro-

jector to match the distance (H) from the lens center position (see page 30) to the lower edge of the image, when mounting the projector on the ceiling.

■Invert the image by setting

“Ceiling + Front” in “PRJ Mode”. See page 71 for use of this function.

When using the default setting.

▼On-screen Display

The image is reversed.

When using the default setting.

▼On-screen Display

The image is reversed.

When using the default setting.

▼On-screen Display

The image is inverted.

-32