![](/images/new-backgrounds/1267260/267260121x1.webp)
Displaying Dual Pictures (Pict in Pict)
Picture in Picture function allows you to display two pictures on the same screen. You can display the image input from INPUT 3 or 4 as an inset picture overlapping the main picture from INPUT 1 or 2.
Displaying the Inset Picture
1 Press .
2 Press or
on the remote
control or on the projector to switch the image in the in- set picture .
3 Press ', ", \ and to set the position of the inset picture.
•Press to stop the frame from mov- ing or to make the frame disappear.
4 Press
to move the inset pic- ture.
•The inset picture will be moved to the inset picture frame.
Note
•The inset picture can only be displayed with composite video (NTSC/PAL/ SECAM) or
•The Freeze function works only with the inset picture, when the Pict in Pict mode is in operation.
When the signal entered into INPUT 1 or 2 is as follows, Pict in Pict does not work:
•With a resolution that exceeds SXGA.
•When the input signal is 480I, 480P, 540P, 580I, 580P, 720P, 1035I or 1080I.
•When the input signal has changed to the Interlace mode using RGB signals.
•When the picture display mode is set to “DOT BY DOT”.
•When no signals are sent to INPUT 1 or 2, or when the resolution or refresh rate (vertical frequency) is changed.
UNDO button
ENTER button
', ", \, buttons
PinP button
INPUT 3/4 buttons
Easy to
Use Functions
-57