Sharp PG-C45X operation manual Selecting the Economy Mode, Setting the Power Save Mode

Selecting the Economy Mode

These functions allow you to reduce the power consumption of the projector.

Setting the Power Save Mode

Select “Power Save” in “Economy Mode” under the “Options (1)” menu on the menu screen.

➝For operating the menu screen, see pages 42 to 45.

Note

•Although lamp life and noise are improved when “Power Save” is set to “ON”, bright- ness decreases by 20%.

•“Power Save” mode is factory preset to “OFF”.

Monitor Out/RS-232C Off Function

This projector consumes power when using a monitor connected to the OUTPUT (INPUT 1,

2)terminal and a computer connected to the RS-232C terminal. When not using these ter- minals, “Mntr.out/RS232” can be set to “OFF” to reduce standby power consumption.

Select “Mntr.out/RS232” in “Economy Mode” under the “Options (1)” menu on the menu screen.

➝For operating the menu screen, see pages 42 to 45.

ON	Monitor Out/RS-232C connection
	is set to “ON”.
OFF	Monitor Out/RS-232C connection
	is set to “OFF”.

Note

•Set “Mntr.out/RS232” to “ON” when using the Sharp Advanced Presentation Software.

Status	Brightness	Power	Lamp Life
		consumption
ON	80%	290 W	2,000 hours
(Low power
mode)
OFF	100%	340 W	1,500 hours
(Standard
mode)

Easy to Use Functions

-69