Displaying the Break Timer

This function can be used to show the remaining time for break during meeting.

Displaying and Setting the Break Timer

1 Press . The break timer starts to count down from 5 minutes.

2 When “” is displayed, press

', " , \ or to set the break timer.

You can set anywhere between 1 and 60 minutes (in 1 minute units).

The break timer starts to count down as soon as ' , " , \ or is pressed.

3 Press to cancel the break timer.

Note

Auto Power Off will be temporarily dis- abled during the break timer.

When no input signal is detected for more than 15 minutes, the projector will auto- matically shut off if the break timer has elapsed.

The break timer will be displayed on the startup image. To change the screen dis- played during the break timer, change the setting of “Startup Image” (see page 68).

', ", \,

buttons

BREAK TIMER button

"On-screen Display

Easy to Use Functions

-59

Page 63
Image 63
Sharp PG-C45X Displaying the Break Timer, Displaying and Setting the Break Timer, Press to cancel the break timer