O T H E R C O N V E N I E N T F E A T U R E S

4. REFRESH CYCLE

The oven has a special catalyst which assists with smoke and odor removal.

Use the Refresh Cycle to

Condition the heater before using the oven the first time.

Remove any objectionable odor.

Keep the catalyst in optimum condition.

Follow the procedure below. The oven temperature will be maintained at 450 °F when the refresh cycle oper- ates.

HELP

When the indicator light above the CUSTOM HELP is flashing, touch the pad to read valuable information.

MINUTE PLUS

Minute Plus allows you to cook for a minute at 100% by simply touching MINUTE PLUS. You can also ex- tend cooking time in multiples of 1 minute by repeat- edly touching MINUTE PLUS during manual and auto- matic cooking.

Suppose you want to heat a cup of soup for one minute.

P R O C E D U R E

Touch CUSTOM HELP.

1

2 Touch number 4.

3 Touch START.

NOTE:

1.Remove the turntable from the oven before the Refresh Cycle. No food should be in the oven.

2.The Refresh Cycle is 30 minutes.

3.During the Refresh Cycle some smoke and odor may occur. Open a window or use the ventilation fan in the room.

CAUTION:

The oven door, outer cabinet and oven cavity may be hot.

P R O C E D U R E

1 Touch MINUTE PLUS.

NOTE:

1.To use Minute Plus, touch pad within 3 minutes after cooking, closing the door or touching STOP/CLEAR.

2.Minute Plus can be used to extend cooking times up to 10 minutes during Automatic Cooking. If you need other options see AUTOMATIC COOKING TIME AD- JUSTMENT on page 28.

30

Page 32
Image 32
Sharp R-90GC operation manual Refresh Cycle, Touch Custom Help, Touch Minute Plus