Preparation
Preparation
Installing the Lithium Memory Battery
Installing the Lithium Battery
The supplied lithium battery is used to store the memory of the date and time settings.
1 Press the LCD monitor OPEN release button (1) and open the LCD monitor (2).
LCD monitor OPEN
release button
2 Open the lithium battery compartment door using the tip of a ballpoint pen or other pointed object.
3 Insert the lithium battery into the compartment with the Hside facing out.
5 Close the LCD monitor until it clicks into place.
Removing the lithium battery
Perform steps 1 and 2 above. Lift up the battery using a pointed object, and take it out.
Note:
•Replace the battery with a new CR2025 lithium battery when the time indicator of the camcorder starts to fall behind the correct time.
Notes on the Use of the Lithium battery
REPLACE BATTERY WITH TOSHIBA, MATSUSHITA OR HITACHI MAXELL TYPE CR2025 ONLY. USE OF A DIFFERENT BATTERY MAY PRESENT A RISK OF FIRE OR EXPLOSION.
XKEEP THIS BATTERY AWAY FROM CHILDREN. IF SWALLOWED, CONSULT A PHYSICIAN IMMEDIATELY FOR EMERGENCY TREATMENT.
ZBATTERY MAY EXPLODE IF MIS- USED OR INSTALLED WITH POLARITY REVERSED. DO NOT RECHARGE, DISAS- SEMBLE OR DISPOSE OF IN FIRE.
•Do not
•Should the lithium battery leak, wipe the battery compartment clean, and then insert a new battery.
•The lithium battery will last about one year under normal usage.
4 Replace the compartment door, and close it firmly until it clicks into place.
11