Sharp VL-WD250U Using the Time Code, T I Me Code D I Sp. On, T C Ou T, Useful Features Playback

Useful Features

Playback

Using the Time Code	4 Press the MENU/DISPLAY button to
	turn off the menu screen.
The time code shows the hour, minute and	• The time code appears.
second of recording, and the frame number
(1 frame = approx. 1/30 sec.). This is automati-		Time code
cally recorded along with the subject. You can		T C 0 : 0 5 : 3 5
display the time code on the screen as an
accurate counter in both VCR and CAMERA		SP
modes.

Useful Features

Display format
T C	0		0 0		1 0		2 0
						Frame number*
				Second
								* Displayed during still
		Minute
								or frame advance
Hour								playback.

•The example screens for this feature are for VCR mode.

1 During playback or recording, press the MENU/DISPLAY button until the menu screen appears.

2 Select I, then press r on the Operation button. Select “TIME CODE” (1), then press r (2).

OT H ERS
REMO T E
SOUND
T I ME CODE	D I SP . O F F
T C OU T	D I SP . ON

To turn off the time code

Select “DISP. OFF” in step 3 above.

Note:

•When the tape reaches an unrecorded section, the time code returns to zero (TC0:00:00). Once recorded, the time code cannot be changed.

Displaying the time code on a TV during playback

1 In VCR mode, select I, then press r

on the Operation button. Select “TC OUT” (1), then press r (2).

O T H E RS
REMO T E
SOUND
T I ME CODE	OF F
T C OU T
	ON

2 Press d or y to select “ON”, then press e.

T C OU T ON

3 Press d or y to select “DISP. ON”, then press e.

T I ME CODE D I SP. ON

41