Sharp VL-WD250U Basic Operations, Easy Camera Recording in Full Auto Mode, To pause recording

Models: VL-WD250U

1 92
Download 92 pages 61.38 Kb
Page 31
Image 31
Basic Operations

Basic Operations

Camera Recording

Easy Camera Recording in Full Auto Mode

Before you start recording, perform the operations described on pages 7 through 17 to prepare your camcorder for recording.

REC START/

STOP button

Power switch

1 Remove the lens cap, and lift up the viewfinder.

2 Hold down the Lock button and set the Power switch to CAMERA.

The picture from the lens is now displayed in the viewfinder.

The camcorder is now ready to record (Recording Standby mode).

Auto mode indicator

AU TO

PAUSE

Lock button

Note: If “MANUAL” is displayed at this time, press the AUTO ON/OFF button to set the camcorder to Auto mode.

3 Press the REC START/STOP button to begin recording.

R E C

To pause recording

Press the REC START/STOP button again. Recording pauses, and the camcorder enters Recording Standby mode.

P AU S E

To turn the power off

Set the Power switch to OFF without pressing the Lock button.

Notes:

Battery power is consumed in Recording Standby mode. Turn off the power if you will not be recording again soon.

If the camcorder remains in Recording Standby mode for more than 5 minutes, the power will automatically turn off to save battery power and to protect the tape from being damaged. To resume recording, set the Power switch to OFF and then back to CAMERA. (The camcorder will make a confirmation sound when it is left in Recording Standby mode for about 4 minutes.)

Maximum continuous recording and actual recording times

 

Max. continuous

Actual recording

Battery

recording time

time

 

 

 

 

 

 

pack

LCD

LCD

LCD

 

LCD

 

 

 

closed

open

closed

 

open

 

 

 

 

 

 

BT-L221

120

100

60

 

50

 

 

 

 

 

 

BT-L441

240

200

120

 

100

 

 

 

 

 

 

The chart specifies the approximate times in minutes.

Note:

Using the zoom (see page 19) and other functions or turning the power on and off frequently will increase power consumption. This may result in a decrease of more than 50% in the actual recording time compared to the maximum continuous recording time listed above.

Basic Operations

18

Page 31
Image 31
Sharp VL-WD250U Basic Operations, Easy Camera Recording in Full Auto Mode, To pause recording, To turn the power off