Dimensions, Units inches mm | Sharp XG-C435X, XG-C465X guide

Dimensions

Units: inches (mm)	Rear View

Side View	Top View			/4 (6)		Side View
				1
				/64 (279.5)
				1
				11
			17	(6.5)
			64/
	12 27/32 (326)
			3 31/64 (88.5)
					/32	(50)
	(101.5)4				31
Front View	(101.5)4				(76.5)1
Front View
63	(25)				/64
63	(25)				3
64/					1
	2 15/16
	(74.5)
	5 53/64 (148)	5 53/64 (148)
	2 61/64	1 5/64	2 29/32
	(75)	(27.25)	(73.5)
Bottom View
					/32(235.5)	/64 (268.5)
				(146.5)	/32(235.5)	37
				(146.5)	9	10
					9
				/32
				25
				5

-44

Image 44

Sharp XG-C435X, XG-C465X specifications Dimensions, Units inches mm

Contents

Setup Manual Setting up the Screen Standard Setup Front Projection Screen Size and Projection Distance Throw DistanceScreen 12.2 15.2m 50ft Normal Mode Stretch ModeStandard Zoom Lens F1.7-F1.9, f=28.0-33.6 mm Wide-zoom Lens AN-C12MZ F2.2-F2.7, f=24.5-30.7 mm Tele-zoom Lens AN-C18MZ F1.7-F2.2, f=36.5-46.3 mm Tele-zoom Lens AN-C27MZ F2.0-F2.8, f=53.8-82.9 mm Tele-zoom Lens AN-C41MZ F2.1-F2.8, f=83.5-117.2 mm Changing the Lens Info Replace the lens housing cover Insert the lens into the projector Connecting Pin Assignments COMPUTER-RGB Input/Output Component Input/Output Connecting Pin Assignments Pin No. Signal Basic format RS-232C Specifications and CommandsComputer control Communication conditions Commands W R Return DVI Signal Type D. PC Comp OK or ERR Lamp Timer Reset command is available only in standby mode Setting up the Projector Network Environment Network settings on the computer Connecting the Pro- jector to a Computer Setting an IP Address for the Computer Confirm or change an IP address for the setup computer Setting up a Network Connection for the Projector Dhcp Version 5.0 or later Controlling the Projector Using Internet ExplorerControlling the Projector via LAN Confirming the Projector Controlling the ProjectorStatus Status Control Setting and Adjusting Setting the SecurityProjector Settings & Adjustments Network Security Making General Settings for the Network Network Setting for Sending E-mail when an Error OccursMail Originator Settings General Example of the display when an error occurs Mail Recipient SettingsOccurs Service & Support Access URL Setting up the Projector Using RS-232C or Telnet When Connecting Using RS-232CInput setup and press the Enter key Launch general purpose terminal emulator When Connecting Using Telnet ClickStartfrom theWindows desk- top and select Run Setup Menu Main Menu Set Items View Setting Detail ListVView All Setting Save Settings and Quit Quit without Saving SetSSave & Quit Tings QQuit Unchanged IP Address Setting Default Gateway SettingSubnet Mask Setting User Name Setting Password Setting Projector Name SettingDhcp Client Setting RS-232C Baud Rate Set Disconnecting All Connec Setting Auto Logout TimeEntering Advanced Setup Menu Data Port Setting Accepting All IP Addresses Setting of Accept IP Ad- dressCarrying out Network Ping Test Return to Main Menu Setting of Search PortReturn to Default Settings Resetting the Lamp Timer of the Projector via LAN Resetting the Lamp Timer of the Projector via LAN Close HyperTerminal Troubleshooting When connecting the projector using serial-connection Troubleshooting \ After the initialization, carry out setting again Dimensions Units inches mm When AN-C12MZ is installed When AN-C18MZ is installedWhen AN-C27MZ is installed When AN-C41MZ is installed