Sharp XL-DAB10NH, XL-DAB20NH operation manual E-20, Sleep operation

Timer and sleep operation (Remote control only) (continued)

7Press the or button to set hour and then press the CLOCK/TIMER button.

8Press the or button to set minute and then press the CLOCK/TIMER button.

9To select the timer playback source, switch input with

or button to select “SOURCE”, then press the CLOCK/TIMER button.

10Press the or button to select wake up source (CD, USB, Tuner, iPod) then press the CLOCK/ TIMER button to confirm.

11If “TUNER” is selected, press the CLOCK/TIMER button to enter the preset selection mode.

12 To select a preset channel number, press the or button and then press the CLOCK/TIMER button.

13 The “ ” indicator lights up and the unit is ready for timer playback.

14 Press the ON/STAND-BY button to enter the power stand-by mode. Press the CLOCK/TIMER button to confirm the timer setting.

15 When the preset time is reached, playback will start. “ ” indicator will blink to show timer playback. The volume will increase gradually until it reaches the last volume level.

16 When the timer end time is reached, the system will enter the power stand-by mode automatically.

Checking the timer setting:

1Press the CLOCK/TIMER button repeatedly to view as follow:

Cancelling the timer setting:

Press the SLEEP button for 2 seconds. The “ ” indicator disappear and the display show “TMR-OFF”.

Reusing the memorised timer setting:

The timer setting will be memorised once it is entered. To reuse the same setting, press the SLEEP button for 2 seconds.

The “ ” indicator light up and the display show “TMR-ON”.

Notes:

●After selecting the playback source, when press the CLOCK/TIMER button to confirm, “SOURCE” will appear and blink for 2 seconds, then change to last function.

●When the preset time is reached, playback will start at current setting if no selected playback source is made.

●The volume cannot be preset during timer setting.

■Sleep operation

The radio, compact disc and USB can all be turned off automatically.

1Play back the desired sound source.

2Press the SLEEP button.

3Within 10 seconds, press the SLEEP button repeatedly to select the time.

10 20 30 ... 80 90

4“SLEEP” will appear.

5The unit will enter the power stand-by mode automatically after the preset time has elapsed.

To confirm the remaining sleep time:

1Whilst “SLEEP” is indicated, press the SLEEP button. The remaining time is displayed for about 10 seconds.

To cancel the sleep operation:

Press the ON/STAND-BY button whilst “SLEEP” is indicated. To cancel the sleep operation without setting the unit to the stand-by mode, proceed as follows.

1Whilst “SLEEP” is indicated, press the SLEEP button.

2Within 10 seconds, press the SLEEP button repeatedly to select “SLEEP 00”.

E-20