General control (continued) | Setting the clock (Remote control | |
| only) | |
| ||
|
|
|
■Function (on main unit only)
When the FUNCTION button on main unit is pressed, the current function will change to different mode. Press the FUNCTION button repeatedly to select desired function.
CD 
TUNER 
DAB
AUX IN 
iPod 
USB
Note:
The backup function will protect the memorised function mode for a few hours should there be a power failure or the AC power lead becomes disconnected.
■Equaliser
When the EQUALIZER button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQUALIZER button repeatedly until the desired sound mode appears.
FLAT Noequalizationequalisation. .
ROCK Forr rockrockmusicmusic. .
CLASSIC Forr clasclassicalical musicmusic. .
POPS Forr poppopmusicmusic. .
VOCAL Vocalscals arearenhancedenhanced. .
JAZZ Foror jazzjazz. .
In this example, the clock is set for the
1Press the
2Press and hold the CLOCK/TIMER button until “00:00” appear.
3Within 10 seconds, press the 
or 
button to adjust the hour and then press the CLOCK/TIMER
button. Press the 
or 
button once to advance the time by 1 hour. Hold it down to advance continuously.
4Press the 
or 
button to adjust the minutes and
then press the CLOCK/TIMER button. Press the 
or
button once to advance the time by 1 minute. Hold it down to advance continuously.
To confirm the time display:
[When the unit is in the
Press the CLOCK/TIMER button. The time display will appear for about 5 seconds.
[When the power is on]
Press the CLOCK/TIMER button. The time display will appear for about 5 seconds.
Note:
The “00:00” will appear blinking when the AC power supply is restored after a power failure or unplugging the unit. Readjust the clock as follows.
To readjust the clock:
Perform “Setting the clock” from step 1.
