Computer Image Adjustments (INPUT 2 (RGB) mode only)
Remote control
| RGB/ |
INPUT 1 | COMPONENT PICT MODE |
INPUT 2 | AUTO SYNC GAMMA |
| 1 |
CLR TEMP | |
VIDEO | KEYSTONE FREEZE |
Auto Sync Adjustment
•Used to automatically adjust a computer image.
•Auto Sync adjustment can be made manually by pressing AUTO SYNC.
•The sync adjustment is automatically made each time the projector is turned on while connected to a computer or the input selection is changed.
1Press AUTO SYNC on the remote control.
| During Auto Sync adjustment, “Adjusting The Image” |
| is displayed as shown on the left. |
| |
| • Auto Sync adjustment may take some time to complete, |
| depending on the image of the computer connected to the |
| projector. |
| • When the optimum image cannot be achieved with Auto |
| Sync adjustment, use manual adjustments. (See page 27.) |
|
|
Operation
26
