Sharp XV-Z7000E operation manual Selecting the On-screen Display Language, Projector

Selecting the On-screen Display Language

Projector
	ON/OFF	LAMP
POWER			2, 3
		TEMP.
	KEYSTONE
INPUT		PICT MODE	2, 4
BACK		ENTER	MENU
			1, 5

Remote control

VOL

POWER

MUTE

BACK

MENU

ENTER

English is the preset language for the On-screen Display. The language can be set to English, German, Spanish, Dutch, French, Italian, Swedish, Portuguese, Chinese, Korean or Japanese.

1Press MENU.

2Press ∂/ƒ to select “Language”, and then press

ENTER.

3Press ∂/ƒ to select the desired language.

(GUI) On-screen Display	4 Press ENTER to save the setting. The On-screen
	Display is now programmed to display in the
	language selected.

5To exit from the GUI, press MENU.

Operation

Selecting the Video Input System Mode (S-VIDEO or VIDEO mode only)

Projector Remote control

	ON/OFF	LAMP		VOL
POWER			2, 3	POWER
		TEMP.
	KEYSTONE
			2, 4	MUTE
INPUT		PICT MODE		BACK
				MENU
BACK		ENTER	MENU
			1, 5	ENTER

The video input system mode is preset to “Auto”; however, it can be changed to a specific system mode, if the selected system mode is not compatible with the connected audiovisual equipment.

1Press MENU.

2Press ∂/ƒ to select “Video System”, and then press ENTER.

3Press ∂/ƒ to select the desired video system mode.

(GUI) On-screen Display

4Press ENTER to save the setting.

5To exit from the GUI, press MENU.

•When the system mode is set to “Auto”, you may not receive a clear picture due to signal differences. Should this occur, switch to the video system of the source signal.

23