Sherwood RD-7502 manual Setting the CH Level

ENGLISH

SETTING THE CH LEVEL

CH LEVEL MODE : CAL / REF 1 / REF 2 Memory mode

FL : 0 dB / -15~+15

C : 0 dB / -15~+15

FR : 0 dB / -15~+15

SR : 0 dB / -15~+15

BR : 0 dB / -15~+15

B L : 0 dB / -15~+15

S L : 0 dB / -15~+15

SW : 0 dB / -15~+15

DD: 0 dB / -10~0 DTS : 0 dB / -10~0

RETURN

Note :

•Depending on the speaker settings("N" (None or No)), some channels cannot be selected.

Adjusting the current channel level

•You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory("CAL"), not into preset memory("REF 1", "REF 2").

•After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit your tastes.(For details, refer to "Adjusting each channel level with test tone" on page 23.)

1. Press the CURSOR UP(									)/DOWN(	) buttons to select the desired channel.
7		8		9
										Example) When selecting Dolby Digital source’s LFE.
			MUTE
P.SCAN		0			VOLUME
D/A MODE			CH.LEVEL
DISPLAY					SETUP
SEL		ENTER			SEL
T
E
S
T
ST		SEARCH MODE			OU	N D
	ER
	EO				RR
				SU
TONE	SOUND			EXT.IN
	PARAMETER
TAPE	VIDEO 1		VIDEO 2 VIDEO 3
FM/AM/XM		CD	AUX
2. Press the CURSOR LEFT( )/RIGHT(										) buttons to adjust the level of the selected channel or program sources LFE as
desired.
7
				MUTE
P.SCAN		0			VOLUME
	D/A MODE			CH.LEVEL						• The LFE level can be adjusted within the range of -10 ~ 0
DISPLAY					SETUP
SEL			ENTER			SEL				dB and other channel levels within the range of -15 ~ +15
										dB.
T
T
E
S
	S	SEARCH MODE			S			N	D	• In general, we recommend the LFE level to be adjusted
	TE					RO	U
		REO
					UR					to 0 dB.(However, the recommended LFE level for some
TONE		SOUND			EXT.IN
		PARAMETER								early DTS software is -10 dB.) If the recommended levels
TAPE		VIDEO 1		VIDEO 2	VIDEO 3
FM/AM/XM CD				AUX						seem too high, lower setting as necessary.

3. Repeat the above steps 1 and 2 to adjust each channel level.

48