Sherwood V-756 manual When selecting the Scart Output Regional Option

ENGLISH

Continued

When selecting the SCART OUTPUT (Regional Option)

For some countries like Europe, the unit incorporates the TV and VCR SCART connectors which can deliver either the regular video and RGB signals or the S-video (Y and C) signals as well as the mixed audio L and R signals for easy connection.

When the SCART connections between the unit and video components are made, depending on whether you use the regular video signal from the SCART connector or the S-video signals, you can select either the regular VIDEO or the S-VIDEO.

Note :

Be sure to set your TV and VCR to the corresponding one of the regular video, S-video (Y and C) and RGB modes to match the SCART OUT setting of the unit. (Refer to the operating instructions of the component(s) connected.)

Tilt the CURSOR/ENTER button upward or downward to select the SCART OUTPUT, then press

1 the CURSOR/ENTER button.

		S C A R T O U T P U T	V I D E O
RC	RC		S - V I D E O

VIDEO : When using the regular video signal from the TV and VCR SCART connectors of the unit. S-VIDEO : When using the S-video signals only from the TV and VCR SCART connectors of the unit. (Only when the COMPONENT VIDEO is adjusted to OFF, you can use the RGB signals, too.)

Tilt the CURSOR/ENTER button upward or downward to select the preferred mode, then

2 press the CURSOR/ENTER button.

38