Sherwood V-756 manual Correcting any wrong programmed item, To clear all programmed items

Continued

5 Repeat the above steps until your selections is completed.

Start the programmed playback in the desired sequence.

6	Main unit
		RC
		or	If the programmed items are all played back, the
			program menu mode is resumed.
Correcting any wrong programmed item.
1	In the program menu mode, move to the program number you want by tilting the
	CURSOR/ENTER button repeatedly.
2	Replacing the wrong program item, performing the steps and in Playing back your
	selections in the preferred sequence procedure on the previous page.
Clearing the programmed items.
To clear a specific item
1	In the program menu mode, move to the program number you want by tilting the
	CURSOR/ENTER button repeatedly.

Clear the item you want.

2	The item you want is cleared.
	RC

To clear all programmed items.

Open the disc tray or turn the power off to the standby mode.

Main unit RC RC

Then all the programmed items are cleared.

oror

ENGLISH

41