Sherwood ASW-670, VR-670 Entering A Setup Code, FUNCTION TABLE of the NUMBERED BUTTONS, English

Models: ASW-670 ST-670 VR-670

1 60
Download 60 pages 10.24 Kb
Page 11
Image 11
FUNCTION TABLE of the NUMBERED BUTTONS

FUNCTION TABLE of the NUMBERED BUTTONS

ENGLISH

Notes:

Some functions for each component may not be available or may work differently.

Depending on other kinds of components that are available for each DEVICE button, some functions may not be available or may work differently, too.

For details about functions, refer to the operating instructions of each component.

ENTERING A SETUP CODE

This remote control can control up to 4 different components.

Before operating video components other than this unit with using this remote control, the setup code for each component should be entered.

1

Turn on the component you want to control

2

Find the setup code according to the type and

 

the brand name of your component, referring

 

to “Setup Code Table” on page 56.

 

 

 

 

3

Press and hold down both the ENTER

4

Enter a 3 digit code, aiming the remote

button and the DEVICE button you want for

control at the remote sensor on the

more than 1 second.

component.

 

Example) When entering “001”.

 

 

• If entering is performed successfully, the SET LED will

 

 

flicker twice.

 

 

• To be sure that the setup code is correct, press the

 

 

POWER button. If your component is turned off, the setup

• The SET LED will flicker once.

code is correct.

• When your component is not turned off, repeat the above

Note:

 

steps 2 to 4, trying each code for your component until

 

you find one that works.

• The MAIN button is unavailable for the components other

Notes:

than this unit.

• If the SET LED did not flicker twice, then repeat the above

 

 

steps 3 to 4 and try entering the same code again.

 

 

• Manufacturers may use different setup codes for the

 

Repeat the above steps 1 to 4 for each of

5

same product category. For that reason, it is important

your components.

that you check to see if the code you have entered

 

operates as many controls as possible. If only a few

 

functions operate, check to see if another code will work

 

 

with more buttons.

11

Page 11
Image 11
Sherwood ASW-670, VR-670, ST-670 manual Entering A Setup Code, FUNCTION TABLE of the NUMBERED BUTTONS, English