Basic Operation
Before operation
•Before operating this unit with the supplied remote control, refer to "UNIVERSAL REMOTE CONTROLS" on page 10 for details about operation.
LISTENING TO A PROGRAM SOURCE
ENGLISH
1
2
3
Turn the power on.
Turn on the supplied active subwoofer and source component for playback.
Select the desired input source.
•Each time the POWER button is pressed, the unit is turned on to enter the operating mode(the STANDBY indicator lights up in blue)or off to enter the standby mode(the STANDBY indicator lights up in amber).
• In the standby mode, if the PLAY/PAUSE( /
) or
OPEN/CLOSE( ) button is pressed, the unit can be also turned on.
Standby mode
This means that the unit is not disconnected from the AC mains and a small amount of current is retained to support the operation readiness.
•For details on operating the supplied active subwoofer, refer to “OPERATION OF ACTIVE SUBWOOFER” on page 14.
•Each time the FUNCTION SELECT button on the front panel, the input source changes as follows :
DVD FM AM TAPE AUX 
(frequency display)
Operate the selected component for playback.
4
Adjust the(overall) volume to a comfortable listening level.
5
To mute the sound.
6 | • “MUTE” flickers. |
|
•To resume the pervious sound level, press the MUTING button again.
To listen with the headphones.
7
• Then the sound from the speakers is cut off.
PHONES
15
