Sherwood ST-670, VR-670, ASW-670 manual Connecting Digital OUT

2. CONNECTING AUDIO/VIDEO COMPONENTs

ENGLISH

•The AUX IN jacks may be connected to an additional audio component such as a CD player, a tape deck, etc.

•The AUDIO OUT jacks may be connected to an additional amplifier or receiver.

•The COMPONENT VIDEO OUTs of this unit are capable of outputting either conventional interlacing video signal or progressively scanned video signal (that can reproduce high-density pictures with less flicker)

•According to the kinds of VIDEO OUTs, the excellence in picture quality is as follows : Progressive “COMPONENT” > Interlaced “COMPONENT” > “S-VIDEO” > “(composite)VIDEO”

•When making COMPONENT VIDEO connections, connect “Y” to “Y”, “PB/CB” to “CB”(or “B-Y”, “PB”) and “PR/CR” to “CR”(or “R-Y”, “PR”).

•Depending on the type of the COMPONENT VIDEO INs of your TV, be sure to set the COMPONENT VIDEO OUTPUT to the corresponding setting.(Refer to “CHANGING THE COMPONENT VIDEO OUTPUT SIGNAL” on page 32.)

Notes :

•When the “Progressive” is selected as the video output signal, the S-VIDEO and (composite) VIDEO OUTs cannot output the normal video signals, meaning the picture will not be shown.

•When the progressive video signals are input into non-progressive COMPONENT VIDEO INs of your TV, the picture may not be shown normally, too. Therefore, when the progressive COMPONENT VIDEO INs of TV are not connected to, you should select the “Interlace” as the video output signal.

•Do not connect the unit to the TV through a VCR. Otherwise the picture may be disturbed due to the copy protection function.

•CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE “STANDARD DEFINITION” OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

3. CONNECTING DIGITAL OUT

•You can enhance the sound quality be connecting this OPTICAL DIGITAL OUT to the OPTICAL DIGITAL IN of an amplifier, MD recorder, etc.

The digital audio signal from a disc is directly transferred. If you connect to a DTS or Dolby Digital decoder, etc. or an amplifier with built-in decoder, you can enjoy theater-quality audio in your home.

7