Shindaiwa C242/EVC, 89302 manual Product Description, 6SHFLÀFDWLRQV, Do not make unauthorized

Product Description

Using the illustration as a guide, familiarize yourself with your machine and its various com- ponents. Understanding your machine helps ensure top perfor- mance, long service life and safer operation.

Gearcase

Brushcutter

blade

C242

Ignition	Throttle	0XIÀHU	Spark plug
	interlock
		Strap
Throttle		Hanger
			Fuel tank

Outer tube

Handlebar

Cutting attachment	WARNING!
shield	Do not make unauthorized
	PRGL¿FDWLRQVRUDOWHUDWLRQVWRDQ\RI
	these units or their components.

6SHFLÀFDWLRQV

Engine model	SF242E
Dry weight (less attachment)	5.7 kg / 12.6 lb
Engine type	2-cycle catalyst
Bore x stroke	33 x 28 mm / 1.3 x 1.1 in.
Displacement	23.9 cc / 1.5 cu. in.
Maximum power	1.0 HP/0.8 kW @ 8000 min-1(rpm)
Recommended idle speed	3,000 (±250) min-1(rpm)
Fuel/oil ratio	50:1 with ISO-L-EGD or JASO FC class 2-cycle mixing oil*
Carburetor type	Walbro WYK, diaphragm-type
Fuel tank capacity	670 mL / 22.3 oz
Ignition	One-piece electronic, transistor contolled
Spark plug	NGK BPMR6A
Electrode Gap	0.6 - 0.7 mm / .024 -.028 in.
Torque	170 - 190 kg cm / 16.7 - 18.6 N∙m
Air cleaner type	Foam, non reversible
Starting method	Recoil
Stopping method	Slide switch
Transmission type	Automatic, centrifugal clutch w/bevel gear
Handle Type	Bicycle type
EPA Emission Compliance Period**	Category A

Specifications are subject to change without notice.

**The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category C = 50 hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours (Extended).

* The NGK BPMR6A also meets the requirements for electro magnetic compliance (EMC).

5