Shindaiwa DGW310MC, DGW310DMC Remote Control Box Option, How to connect remote control box

Caution: Burns

Do not touch the engine and muffler during operation and immediately after stopping it, for the temperature can reach extremely high

When checking engine oil or changing oil, always stop the engine, and wait until the engine cools down. If you open either the oil gauge or the oil plug during operation, hot oil may cause some injuries.

When the oil pressure drops during operation, the monitor lamp flashes and the automatic shutdown is engaged. When this occurs, check the engine oil level and replenish the maximum level if needed.

Caution

The monitor cannot detect the degradation of engine oil. Please check engine oil periodically and replenish if

needed.

(Refer to 11. Checking and Maintenance )

『

』

Water Temp ,

Charge or

Oil Pressure is detected.

Check fuse next, when the abnormality other than

『

』『

』 『

』

If a fuse is burnet, consult with our authorized distributor or our service section, because there may be an

abnormality of electric/electronic parts or wiring and repairing may be required.

＜(Refer to＞4. Parts

)

『

』

5-5. Remote Control Box (Option)

You can make remote control by connecting our remote control box

cover

How to connect remote control box

1. Remove the remote control

DMC

Receptacle cover.

screw

DMC: M5 Screw x 2 pcs

）

（MC: M4 Screw x 2 pcs

cover

）

MC

screw

12