Shindaiwa DGW310MC, DGW310DMC owner manual SAE30 SAE20

6. Initialization and Pre-check

△ Caution: Fire/Burns/Injuries

When checking engine, always stop the engine and keep away from hire. Wait until the engine cools down before performing any check.

6-1. Engine Oil

When checking engine oil, be sure to
Keep the equipment leveled and insert
			Oil Gage
The oil gauge all the way in.
Before starting the equipment, make
Sure to fill the engine oil to the UPPER
Line through the oil inlet.			Oil Plug
		Oil Drain Plug	Oil Inlet
			ﾞ
Caution
＜	＞
	If the equipment is not levels, you cannot obtain accurate oil level. Do not overfill (over UPPER line)ﾞ the

engine oil. The excessive oil may damage the engine (inside cylinder).

Selection of proper engine oil

Select the proper viscosity engine oil in compliance with ambient temperature. (Refer to the chart below)

	Caution
	Use the API class CD or higher.
Viscosity and temperature
		Temperature	Over+20	+10	+20	-10	+40
	＜	Viscosity	SAE30	SAE20		SAE10W/30
		＞
			℃	～	℃	～	℃

16