Shindaiwa DGW310MC, DGW310DMC owner manual Simultaneous use of Generating and Welding

10. Simultaneous use of Generating and Welding

The circuit breakers react on the AC power supply circuit only. In the simultaneous use of welding and generating, there may be happen overload to the engine. Refer to the following table and limit AC power use.

Limitation of AC Power Supply in the simultaneous use of welding and generating (60Hz)

DGW310DMC

Welding Output

Rod/Current Select

2.0mm/60A Dual

2.6mm/120A Dual

3.2mm/140A Dual

4.0mm/170A Dual

5.0mm/240A Single

6.0mm/300A Single

AC Power Output

3-P Output (PF 0.8)	1-P Output
9.3kVA	7.4kVA
7.2kVA	5.7kVA
6.4kVA	5.1kVA
5.2kVA	4.1kVA
2.0kVA	1.6kVA
0kVA	0kVA

￿The 1-P figure shown is the total output of 1-P 100/110V and 200/220V.

DGW310MC

Welding Output

Rod/Current Select

2.0mm/60A Regular

2.6mm/120A Regular

3.2mm/140A Regular

4.0mm/170A Regular

5.0mm/240A Regular

6.0mm/300A Regular

AC Power Output

3-P Output	1-P Output
9.3kVA	7.4kVA
7.2kVA	5.7kVA
6.4kVA	5.1kVA
5.2kVA	4.1kVA
2.0kVA	1.6kVA
0kVA	0kVA

￿The 1-P figure shown is the total output of 1-P 100/110V and 200/220V.

Caution

＜Simultaneous＞ use of Welding and AC Power is NOT available. Avoid simultaneous use in the case high welding quality is required.

30