1. Safety Guidelines
Danger: Suffocation from exhaust fume
Exhaust fume from the engine contains many elements harmful to human. Do not operate this equipment in poorly ventilated areas, such as inside a room or in a tunnel.
Danger: Electric Shock
Do not touch the output terminals during operation
Do not insert metal objects (such as pin or wire) into receptacle
Do not touch wires or electric parts inside the equipment during operation.
Before connecting or disconnecting a load cable from output terminals, always turn the circuit breaker to OFF position.
Before connecting or disconnecting a load cable from output terminals, always turn the circuit breaker to OFF position.
Before connection or disconnection a welding cable from DC output terminal, stop the engine and remove the engine key.
Before performing any equipment check or maintenance, stop the engine and remove the engine key. A maintenance person should always keep the key.
Danger: Burns
Do not open the radiator cap while operating this equipment or immediately after stopping the equipment, to avoid sustaining burns from hot vapor.
Danger: Injuries
Close all doors and place locks during operating this equipment, to avoid injuries by unintentional touching a cooling fan and fan belt.
Caution: Suffocation from exhaust fume
Do not point the exhaust fume toward pedestrians or building.
Caution: Suffocation from exhaust fume
Be sure to wear a fume proof mask in operation, because welding fume contains poisonous gas and dust. Pay attention to the airflow direction and ventilation also in order to prevent from inhaling the fume.
2
