Danger: Injuries
Close all doors and locks during operating equipment to avoid injuries by accidental touch cooling fan or fan belt.
Danger: Burns
Do not open the radiator cap while operating the equipment or immediately after stopping the equipment to avoid sustaining burn from hot vapor.
Caution: Burns
Do not touch the engine or muffler during operation or immediately after stopping the equipment for the temperature can reach extremely high.
Check to see if the coolant/water level is between | FULL and LOW in the sub tank. | ||||||
If it is below |
|
|
| 『 | 』 |
| |
LOW level, fill he tank and the radiator accordingly. |
| ||||||
| 『 | 』 |
|
|
|
|
|
(1) Filling the sub tank |
|
|
|
|
| ||
1. | Remove the sub tank cap. |
|
|
| Cap | ||
2. | Fill up the sub tank to | FULL | level. |
|
|
| |
3. Install the cap again. |
|
|
|
| Sub Tank | ||
|
|
|
|
|
|
| |
(2) Filling the radiator |
|
|
|
|
| ||
1. | Open the top plate. |
|
|
|
|
| |
2. | Remove the radiator cap. |
|
|
|
| ||
3. | Fill the radiator up to the top/ |
|
|
|
| ||
4. Install the cap again and tighten. |
|
|
| ||||
5. | Close the top plate. | 『 | 』 |
|
| Sub tank | |
Caution
＜ Use Long＞ Life Coolant to prevent from freeze and rust. (30% mixture LLC is filled when shipped out from factory)
17
Top Door |
Radiator |
Cap |
Water Inlet |
