Cisco Systems 11500 Series Installing the CSS, Installing a CSS 11501 as a Freestanding Unit

Chapter 1 Unpacking and Installing the CSS

Installing the CSS 11501

Installing the CSS 11501

The CSS 11501 can be a freestanding unit or installed in a 19-inch equipment rack, as described in the following sections.

Warning Do not remove the CSS 11501 cover. There are electrical shock hazards present in the unit if the cover is removed. The fans and power supply in a CSS 11501 are not user-serviceable or installable components.

Note Removing the CSS 11501 cover voids its warranty.

This section covers:

•Installing a CSS 11501 as a Freestanding Unit

•Installing a CSS 11501 as a Rackmounted Unit

Installing a CSS 11501 as a Freestanding Unit

To install a freestanding CSS 11501:

1.Position the CSS 11501 on the selected flat surface.

2.Attach the rubber feet, provided in the accessory kit, to each bottom corner of the CSS.

Note All cables connect to the front of the chassis with the exception of the power cord.

	Cisco 11500 Series Content Services Switch Hardware Installation Guide
1-12	78-13884-06