Chapter 2 Cabling and Troubleshooting the CSS
Cabling the CSS 11503 and CSS 11506 Modules
Table
LED Name | Color | State | Indicates |
|
|
|
|
Duplex | Green | Off | Port is operating at half duplex. |
for Ethernet Port |
|
|
|
| On | Port is operating at full duplex. | |
|
| ||
|
|
|
|
Link /Act | Green | Off | There is no link. |
for the Gigabit |
|
|
|
| On | The link exists and | |
Ethernet Port |
| ||
|
| synchronization is achieved. | |
|
|
| |
|
|
|
|
|
| Blinking | The link is established with |
|
|
| transmit or receive activity. |
|
|
|
|
Cabling the CSS 11503 and CSS 11506 Modules
The CSS 11503 and CSS 11506 modules have connectors and LEDs on their front panels. The following sections describe:
•CSS 11503 and CSS 11506 Module Overview
•Switch Control Module Connectors and LEDs
•Fast Ethernet Module Connectors and LEDs
•Gigabit Ethernet Module Connectors and LEDs
•Session Accelerator Module LEDs
•Secure Socket Layer (SSL) Module LEDs
For information on the connector pinouts, refer to Appendix B, Cable Connector Pinouts.
If you encounter problems with the modules in the CSS 11503 and CSS 11506, see the “Troubleshooting the CSS Modules” section later in this chapter.
| Cisco 11500 Series Content Services Switch Hardware Installation Guide |