Cisco Systems 11500 Series manual Table C-1 CSS Console Port Default Settings

Appendix C Connecting a Modem to the CSS

Cabling a Modem to the CSS

Make sure that the settings on the remote console match the CSS default settings specified in Table C-1.

Table C-1 CSS Console Port Default Settings

Parameters	Default Settings
Baud	9600
Data Bits	8
Parity	None
Stop Bits	1
Terminal Type	VT100/ANSI
Flow Control	None

Note When you remotely log in to the CSS through a modem, make sure that you log out before disconnecting from the session. Use the idle timeout minutes command to set the maximum amount of time that the console session can be idle on the CSS before the CSS logs it out. By default, the timeout is disabled.

	Cisco 11500 Series Content Services Switch Hardware Installation Guide
78-13884-06		C-3