Cisco Systems 11500 Series manual 2-41, 12 Troubleshooting the CSS Modules continued

Chapter 2 Cabling and Troubleshooting the CSS

	Troubleshooting the CSS Hardware Components
Table 2-12 Troubleshooting the CSS Modules (continued)
Symptom	Recommended Action
You cannot access log or	Replace the disk containing the files. Remove
archive files on the CSS disk but	the disk and install the replacement in the
traffic is still passed in and out	SCM. Refer to the reference sheet that comes
of the CSS.	with the replacement disk.
	After you install the disk in the SCM, you must
	wait 10 seconds before you can reseat or
	remove it.
	If the replacement disk does not have the same
	software version that the CSS is running, the
	SCM will not initialize the disk. You must
	reboot the CSS and configure a primary boot
	record. You can select the CSS software
	currently on the disk or instruct the CSS where
	to locate the CSS software ADI file to install on
	the disk. If you archived an offline version of
	your CSS running-config file, copy it back onto
	the CSS.

	Cisco 11500 Series Content Services Switch Hardware Installation Guide
78-13884-06		2-41