Chapter 1 Unpacking and Installing the CSS
Preinstallation Requirements
Preinstallation Requirements
Prior to installing the CSS, observe the following installation requirements:
•The ambient operating temperature is 32° to 104°F (0 to 40°C).
If you install the CSS in a closed or
•The minimum clearance requirement is 2 inches (10 cm) of air flow space on both sides of the chassis.
•Ensure that the CSS is reliably grounded to earth. Cisco Systems recommends that you do not use power strips or extension cords to connect the CSS to the power source.
Caution To prevent the chassis from overheating, never install a CSS in an enclosed rack or in a room that is not properly ventilated or air conditioned.
See the following sections for the steps to install a CSS:
•Installing the CSS 11501
•Installing the CSS 11503
•Installing the CSS 11506
|
| Cisco 11500 Series Content Services Switch Hardware Installation Guide |
|
|
|
|
| ||
|
|
| ||
|
|
|
