Shindaiwa F222, T222 Safety Instructions, The Properly Equipped Operator, Work Safely, Stay Alert

Models: 81372 T222 F222

1 52
Download 52 pages 17.32 Kb
Page 3
Image 3
Safety Instructions

Safety Instructions

Work Safely

Shindaiwa trimmers operate at very high speeds and can do serious damage or injury if they are misused or abused. Never allow a person without training or instruction to operate this unit!

WARNING!

Never make unauthorized attachment installations. Do

not use attachments not approved by Shindaiwa for use on this unit.

Stay Alert

WARNING!

Minimize the Risk of Fire

NEVER smoke or light fires near the engine.

ALWAYS stop the engine and allow it to cool before refueling. Avoid overfilling and wipe off any fuel that may have spilled.

ALWAYS inspect the unit for fuel leaks before each use. During each refill, check that no fuel leaks from around the fuel cap and/or fuel tank.

If fuel leaks are evident, stop using the unit immediately. Fuel leaks must be repaired before using the unit.

ALWAYS move the unit to a place well away from a fuel storage area or other readily flammable materials before starting the engine.

NEVER place flammable material close to the engine muffler.

NEVER operate the engine without the spark arrester screen in place.

You must be physically and mentally fit to operate this unit safely.

WARNING!

Never operate power equipment of any kind if

you are tired or if you are under the influence of alcohol, drugs, medication or any other substance that could affect your ability or judgement.

WARNING!

Use Good Judgment

ALWAYS wear eye protection to shield against thrown objects.

NEVER run the engine when transporting the unit.

NEVER run the engine indoors! Make sure there is always good ventilation. Fumes from engine exhaust can cause serious injury or death.

ALWAYS clear your work area of trash or hidden debris that could be thrown back at you or toward a bystander.

ALWAYS use the proper cutting tool for the job.

ALWAYS stop the engine immediately if it suddenly begins to vibrate or shake. Inspect for broken, missing

or improperly installed parts or attachments.

NEVER extend trimming line beyond

the length specified for your unit.

ALWAYS keep the unit as clean as practical. Keep it free of loose vegetation, mud, etc.

ALWAYS hold the unit firmly with both

hands when cutting or trimming, and maintain control at all times.

ALWAYS keep the handles clean.

ALWAYS disconnect the spark plug wire before performing any maintenance work.

The Properly Equipped Operator

Wear close-fitting clothing to protect legs and arms. Gloves offer added protection and are strongly recommended. Do not wear clothing or jewelry that could get caught in machinery or underbrush. Secure hair so it is above shoulder level. NEVER wear shorts!

Keep a proper footing and do not overreach— maintain your balance at all times during operation.

Wear appropriate footwear (non-skid boots or shoes): do not wear open-toed shoes or sandals.

Never operate the unit while barefoot!

Wear hearing protection devices and a

broad-brimmed hat or helmet.

Work SafelyStay Alert Always wear eye protection such as goggles or safety glasses.

Always operate with both hands

firmly gripping the unit.

Keep away from the rotating trimmer line at all times, and never lift a moving attachment above waist-high.

Minimize the Risk of Fire Always make sure the appropriate cutting attachment shield is correctly

installed and in good condition.

Page 3
Image 3
Shindaiwa F222 Safety Instructions, The Properly Equipped Operator, Work Safely, Stay Alert, Minimize the Risk of Fire