Microphone mute |
|
|
During a phone conversation, press | key, the LCD screen will display | . The |
microphone will be disabled, but you will still be able to hear the caller. Press | again | |
to restore a phone conversation. |
|
|
Putting the caller on hold
During a phone conversation, press the INT key. The other party will hear beeping sound. Press INT key again to restore the phone conversation.
Last number redial
To dial the last dialled number, take phone line by 
key, then press RD
key. The last number will be automatically dialed out.
One of the last 10 numbers redial
SD 8141 automatically store the last 10 dialled numbers. To call one of them, press
RD
key, and search through the list by RD
or 
keys until the LCD screen display the desired number.
R Key (recall) |
| |
Pressing | \ | key during a phone conversation allows you to access to the |
| ||
supplementary service of the network (example, the call waiting if subscribed with the network operator).
Paging handset
Pressing P key of the base, the handset will ring. This function can be useful, for example, to locate the handset. Press any key on the handset to end a paging call.
Out of range indication
Please note that the conversation will be cut off if you are far from covered range of the
base set. The symbol |
| will blink on the LCD screen. |
| |||
|
| |||||
Battery level indication |
|
|
|
|
| |
LCD will display 4 battery levels: | = full; | middle; | = low. If the symbol is | |||
displayed | , , it indicates that the battery is flat. Put handset in the cradle for | |||||
charging. |
|
|
|
|
|
|
Using earphone
Sd8141 is equipped with a 2.5mm jack where it can be connected to one standard earphone typically used for mobile phone.
ATTENTION: select the proper earphone making sure it is the standard type
9
