A glance guide to the buttons on your handset. The handset
Earpiece
Display Listening See page 4.
MEM button
press to make calls to numbers stored in memory FLASH button you will need this if your phone is connected to a PBX, or if you use Call- waitting servies
PHONE 
button
SD 8141
02899832620
OK button
press during programming to confirm your selections. Press and hold to switch the handset off.
MENU button
Press to start and end the programming menu.
press to begin, answer and end a telephone call.
REDIAL button
press to display the last 10
numbers you dialled. | |||
UP and DOWN buttons | |||
Press during |
| ||
programming to | RD | ||
move through | |||
| |||
the menu. |
| ||
Press during |
| ||
a call to change |
| ||
the volume |
| ||
in the earpiece. |
| ||
/ | (Caller Display) | ||
Press to display details of people who have called you.
C (CLEAR) button
Press during programming to move back to the previous menu option, or to clear digits one by one from the display MUTE button
Press during a call to mute the microphone so the
other person could not hear you.
INT button
Press to make an intercom call if you
INT have more than one
handset registered to ther base unit.
SPEAKERPHONE button
press to turn the speaker-
phone on and off.
Microphone
pick up the voice
Charge contact
Charging batteries
Before you can use the handset to make calls you will need to fit and fully charge the batteries, as described on pages 6 to 8.
Please read the notes on page 5 before you install the base unit.
3
