Shiro SD8141 manual Setting LCR Special, Setting LCR Others, Multi handset configuration

Setting LCR “Special”

Enter sub-menu "LCR " which is in the main menu and search for "SPECIAL ". Press

and look for "NEW ". Press	, enter area code up to maximum 6 digit and press
to confirm.

To modify an area code: under sub-menu "SPECIAL", select "MODIFY ". Look for the area

code to be modified and press		. By using	key, delete the digit and enter new
one. Press	to confirm.

To delete an area code: under sub-menu "SPECIAL", search for "DELETE". Look for the

area code to be deleted and press to confirm.

To delete all area code stored: under sub-menu "SPECIAL", search for "DEL ALL" and

press to confirm. All area codes will be deleted.

Setting LCR "Others "

Enter sub- menu "LCR " which is in the main menu and search for “OTHERS”. Press

and look for "NEW ". Press , enter area code up to maximum 6 digit and press

To confirm. Press , enter network access code up to maximum 6 digit and press

to confirm.

To modify one entry: under sub-menu "OTHERS ", search for "MODIFY ". Look for the area

code / network operator code to be modified and press	. Using	key, delete
the digit of the area code to be modified. Enter the new digit and press the			key.

Delete the digit of network operator code to be modified. Enter new digit and confirm

by pressing the key.

To delete one entry: under sub-menu "OTHERS", search for "DELETE". Look for the area

code / network operator code and press	to confirm.
To delete all entry: under sub-menu "OTHERS", search for "DEL ALL" and press		to
confirm. All entry will be deleted.

Multi handset configuration

You can subscribe up to 5 handsets to the same base set.

Subscription of optional handset

-Press and hold the base key for about 5 seconds (two beep tone will be hear). The subscription will completed after 1 minute.

-With handset: enter sub-menu "REGISTER” which is in the main menu. "BS 1 2 3 4 " will be displayed on the LCD screen (the numbers 1- 4 will blink, indicating that the handset is already subscribed at the corresponding base number). Choose the base number

and the handset to be subscribed ( from 1 to 4). Press	to confirm .
Key in the PIN code corresponding to the base set (0000 default) and press		. The

handset will start searching and the subscription will be completed in a few seconds. NOTE: repeat the above procedure if it does not work the first time.

17