Manuals / Siemens / Lawn and Garden / Trimmer

Siemens 2000 manual Safety Precautions, For Your Safety, Protection of the Telephone

Models: 2000

1 110

Download 110 pages 50.97 Kb

Page 2

Safety Precautions

Safety Precautions

Note! (for U.S.A and Canada only)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro- vide reasonable protection against harmful interference when the equipment is op- erated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc- tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip- ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

This product is a UL Listed Accessory, I.T.E., in U.S.A. and Canada.

For Your Safety

The IP telephone optiPoint 410/420 complies with the European standard EN 60 950 which deals with the safety of information technology appliances including electronic office equipment. This device has been designed with safety in mind, thus protecting both indi- viduals and objects.

There is always the danger of small objects being swallowed by young children. In the case of the optiPoint 410/420, this applies in particular to the connecting cord clip.

Please make sure that such items are not accessible to children.

•Use only the enclosed power supply together with the special LAN cable.

•Never open the power supply enclosure.

Protection of the Telephone

•The telephone must not be used in bathrooms, etc. as it is not splashproof.

•Before connecting or disconnecting the LAN cable or the headset cord, pull the power plug out of the plug receptacle first.

2

Image 2

Siemens 2000 manual Safety Precautions, For Your Safety, Protection of the Telephone

Contents

Administrator Manual HiPathSafety Precautions Safety PrecautionsFor Your Safety Protection of the TelephoneLocation of the Telephone Important NotesContents Alphabetical Reference Administration scenariosFactory Default Settings EditorsData Visualisation optiPoint 410 entry only IndexProduct Identification General InformationAbout the Manual Echo EffectGeneral Information Safety Precautions for IP TelephonyVoIP Security Safety Reference to operation stepsOptiPoint 410/420 economy/economy plus/stan- dard/advance Operating the telephoneS o uor OptiPoint 410 entryModel Properties of the Telephone ModelsVoIP Security Connectors on the bottom of the telephone Setting Up the TelephoneInstalling the Telephone Installing the Telephone Starting up the optiPoint 410/420Entering the administration area Preparing for OperationOnly if no Dhcp server TroubleshootingAll configuration types 2nd Function key OptiPoint 410 entry1st Function key Enter IP address of the optiPoint 410 entry to edit see Æ Only if you are working in a Virtual LAN VlanError handling Other settingsRemote maintenance through LAN AdministrationAdministration Locally on the telephonePress keys simultaneously Access to the Administration MenuOptiPoint 410/420 economy/ economy plus/standard/advance Dhcp IP Assignment ConfigurationsOptiPoint 410/420 economy/economy plus/standard/advance Terminal IP AddressVlan ID Default RouteVlan Method LAN Port 1 Mode QoS Layer OptionsSubscriber Number LAN Port 2 ModeSubscriber Password LED Test DiagnosticsDisplay Test Execute test Key TestAudio Loop Test RAM TestPing Test Ping change targetLine Status SLK TestWeb-based Management Tool By pulling the power plugRestart After restartError Messages Other error messages OptiPoint 410 entry Entering the administration areaView settings OptiPoint 410 entry Function CodesReset factory settings No terminal screen No Default RouteLEDs on the phone No IP Address is setNo terminal screen is set No Default Route is setNo Participant No. / password No networkLog in failed No PBX addressPBX does not react OptiPoint display module Firmware UpdateLdap Configuration OptiPoint display module Configuring the Ldap ServerInstalling the Ldap Template OptiPoint application module Installing an Ldap Template OptiPoint application moduleWeb-based Management Tool GeneralOpen web-based management tool PreparationWeb-based Management Tool Http//IP of the telephoneWeb-based Management structure General Information Administrator ActionsChange administrator password General InformationOnly for optiPoint 410/420 standard/advance available Clear screenlock passwordRestart terminal Factory Reset Clear user dataLdap settings Web-based Management ToolAdministrationJava Http Settings ApplicationsMiscellaneous WAP gatewayWAP Favourites Audio Audio settingsDiagnostic Tests Test results Administration File transferFile Transfer optiPoint 410/420 entry/economy/economy plus Java FTP SettingsENB FTP Settings Network Network and RoutingQuality of Service QoS Snmp settingsQoS Data Collection DLS Settings Gateway settings SystemPort Settings Port ControlSrsr Settings Time Settings Voip Encryption SettingsAlphabetical Reference Alphabetical ReferenceDescription of functions Action On SubmitApplication Filename Administration PasswordCancel Mobility Password Application VersionCodec Independent Threshold Values Codec Audio Mode UseCodec Daylight saving CompressionCompressing Codec Threshold Values Debug InterfaceDhcp Default Sntp IPDefault Vlan ID DLS Server PortDomain Name External Access CodeDNS Addresses DSM FilenameFTP Account Name FTP PasswordEmergency Number FTP Server AddressG722 codec FTP SettingsFTP Username Gateway AddressHttps IP Routing Http UsernameInternational Dial Prefix Java GatewayJitter Buffer L2 DefaultL2/L3 Voice/Signalling Language LAN Port SettingsBandwith Possible application Ldap Server IP AddressLdap template example Template-String DeclarationExample for assumption Copy & Paste Syntax of the Ldap template fileLdap Template Filename Port Function LEDs on optiPoint 410/420 right rowLocal Country Code MIB-II Error CountLocal Area Code Local District CodeNon-Compressing Codec Threshold Values Minimal Session LengthNational Dial Prefix Observation IntervalQDC Server QCU Home AddressQCU Standby Address QoS L2/L3Restart Terminal Report ModeService Agent RTP Port BaseSnmp Srsr Switch To Home Expiry Timeout Srsr Automatic Switch BackSrsr Enabled Srsr Switch To Home Retry CountSrsr Tctest Retry Count Srsr Switch To Standby Retry CountSrsr Tctest Expiry Timeout System TypeTimezone offset Time SourceTime Window USB KeyboardWAP Username WAP PasswordWAP Connection Type WAP URL DLS Abbreviations and Specialized TermsCornet IP TS DNSHFA ENBFTP HttpLCD LANLdap LEDPing MIBPBX PSSVlan SIPSLK SntpVoIP SwitchURL WAPSetting up the FTP server Administration scenariosSetting up the FTP server Installation and configuration Administration scenariosCheck LAN connection Check handset functionalitiesStart up not successful Determine the software versionImprove speech quality IP Number Editor EditorsNumber Editor Number EditorBit Block Teminal Mask EditorEditors Key 10x 11x 12x 13x 14x 15x 16x 17x 18x 19x 20x 21x 22x 23x Text EditorText Editor OptiPoint 410/420 economy/economy plus/standard/advanceFunction Standard value Factory Default SettingsStandard value Vlan Dhcp Vlan ID Password Functions Password Function settingKey-Layout Taste Funktion HiPath 3000/5000Binary encoded Ascii table Data Visualisation optiPoint 410 entry onlyStatus Messages Data Visualisation optiPoint 410 entry only101 Technical dataBinary encoded Ascii table Technical data 102OptiPoint 410/420 Administration InterfaceOperation Codes Summary OptiPoint 410/420Operation Codes SummaryOperation Codes SummaryoptiPoint 410/420 104105 Further functionsOptiPoint 410 entryOperation Codes Summary 106 Menu structureMenu structureoptiPoint 410/420 107 IndexIndex Https 108Srsr 109Bestell-Nr. A31003-A2056-B415-7-76A9