optiPoint 410 entry | Administration |
Step by Step
LEDs on the phone:
Error Messages
The LEDs flash till you switch to the Administration Mode Æ page 32.
No IP address
The DHCP server cannot assign a terminal IP address
Æpage 80.
Possible solution
Check the DHCP server.
No terminal screen
The DHCP server cannot assign a terminal screen
Æpage 80.
Possible solution
Check the DHCP server.
No Default Route
The DHCP server cannot assign a default route
Æpage 62.
Possible solution
Check the DHCP server.
No IP Address is set
The DHCP IP assignment Æ page 62 is switched off and no terminal IP address is configured.
Possible solution
Activate the DHCP IP assignment Æ page 17.
Enter the terminal IP adress Æ page 17.
35