Description of functions | Alphabetical Reference |
Compression
•Chose the compression mode which has to be used, if Æ Codec „Lo- Band“ was selected (Æ G.723 oder Æ G.729).
•Standard value Æ page 96.
Æ page 49
Compressing Codec Threshold Values
•Packed Æ Codec
•Lost packet thresholds [in Promille]: Packets which got lost for voice decoding. This value is the proportion from lost packets to total number of packets.
–Valid values: 1 ... 255
–Standard value Æ page 96.
•Consecutive lost packets [in Packets]: the lost packets in serial be- tween two good packets will be counted. If the amount of the counted packets is higher than the entered value the threshold will be exceed- ed.
–Valid values: 1 ... 255
–Standard value Æ page 96.
•Consecutive good packets (aufeinanderfolgend verarbeitete Pakete [in Paketen]): the good packets in serial between two bad packets will be counted. If the amount of the counted packets is lower than the en- tered value the threshold will be exceeded.
–Valid values: 1 ... 255
–Standard value Æ page 96.
Æ page 54
Daylight saving
•This entry is only required if you selected "SNTP" in the Æ Time Source field.
•Activate this field if you want the clock on your telephone to automati- cally switch between daylight saving and standard time.
Æ page 57
Debug Interface
•Only necessary for development. However, this function can be used for debugging customer systems in an emergency.
•If this field is activated, the WindRiver Tornado debugger contacts the telephone and allows the software to be debugged.
Æ page 56
61
