Administration | optiPoint 410 entry |
Step by Step
edg o
r
o
r
optiPoint 410 entry
After integrating the optiPoint 410 entry into your net- work successfully Æ page 16, you can make all other settings through the
Æpage 42.
Entering the administration area
If you are in the administration area, you cannot reach the optiPoint 410 entry ("offline").
All configuration and diagnostic operations are protect- ed against illegal accesses by the Administrator pass- word.
Press keys simultaneously to enter "administration area".
Enter admin password (default: 123456).
Terminate the operation.
You are now in the administration area (all LEDs flash).
View settings
You can make the system display the important settings of your optiPoint 410 entry.
Making changes in the administration area (see above). Press the 2nd function key from the top.
Enter the
Confirm the entry.
The settings are displayed through different illumina- tions of the LEDs. The table on Æ page 100 describes the meaning of the LEDs.
32