Administration | optiPoint application module |
Step by Step
optiPoint application module
Firmware Update
Firmware cannot be updated if a Java MIDlet is active (for example, a speed dialing list).
Perform the following steps to update the software on your optiPoint application module:
1.Make sure that an FTP server is available, see
Æpage 89, and that the relevant firmware file is stored on the server.
2.Start the
Æpage 42.
3.Select "Administration" > [password] > "File Trans- fer", see Æ page 50.
4.Enter the following parameters:
– FTP server address, see Æ page 64
– FTP account name, see Æ page 64
– FTP username, see Æ page 65
– DSM filename, see Æ page 63
5.Select "DSM Filename" from the "Action on submit" list, see Æ page 58.
6.Select "Submit".
LDAP Configuration
The following prerequisites must be fulfilled to use the company telephone directory:
•An LDAP server is available and the server data has
been entered in the
•For an example of an LDAP template, see Æ page 70.
40
