Alphabetical Reference | Description of functions |
Clear Screenlock Password
•Only configurable on optiPoint 410/420 standard/advance and only re- quired if a display module or application module will be used.
•Herewith the user password will be reset.
Æ page 46
Clear User Data
•Only configurable on optiPoint 410/420 standard/advance and only re- quired if a display module or application module will be used.
•With this function you can delete all the entries made by the user in the optiPoint 410/420.
Æ page 46
Codec
•Here you can select the audio transfer principle that should be used.
Codec | Audio Mode | Use of |
High | Uncompressed audio | Uncompressed audio transmis- |
quality | transmission | sion use (Æ G.711). Suitable for |
preferred |
| broadband Internet connec- |
|
| tions. |
|
|
|
Low | Use preferred com- | Suitable for connections with |
bandwidth | pressed audio transmis- | different bandwidths. |
preferred | sion. |
|
|
|
|
Low | Use compressed audio | Suitable for connections with |
bandwidth | transmission exclusively. | low bandwidth. |
only |
|
|
|
|
|
•Standard value Æ page 96.
Æ page 49
Codec Independent Threshold Values
•Max jitter threshold (in ms): The jitter will be compared with this thresh- old. The jitter will be measured between two consecutive RTP packag- es.
–Valid values: 1 ... 255.
–Standard value Æ page 96.
•Avg round trip delay threshold (in ms): Round Trip Delay is the summary of the delays in both directions.
–Valid values: 1 ... 65535.
–Standard value Æ page 96.
Æ page 54
60
