Alphabetical Reference | Description of functions |
Minimal Session Length
•for QDC (QoS Data Collection)
•Standard value Æ page 96.
Æ page 54
National Dial Prefix
•Only configurable on optiPoint 410/420 standard/advance and only re- quired if a display module or application module will be used.
•Canonical format Æ page 83.
Æ page 47
Non-Compressing Codec Threshold Values
•
•Explanation Æ page 61.
Æ page 54
Observation Interval
•For each observation intervall a threshold exceeding will be checked.
•Standard value Æ page 96.
Æ page 54
Packet Size
•The packet size will be expressed in time units. Available are the values Auto, 10 ms und 20 ms.
•Standard value Æ page 96.
Æ page 49
Phone Identity
•Displays the Phone Identity of the optiPoint 410/420.
Æ page 45
PING Test
•Conduct a Æ PING test to check whether a server or another terminal device (e.g., the optiPoint 410/420) can be reached in the network. Available Addresses:
–User specified IP
–Gateway address
–Default route
–Route 1 Gateway
–Route 2 Gateway
–SNMP address
–DLS address
–QCU address
•For this, enter an Æ IP address as the test target, the connection to which you wish to test.
Æ page 27 Æ page 49
74