Alphabetical Reference | Description of functions |
LDAP Template Filename
•Only configurable on optiPoint 410/420 standard/advance and only re- quired if a display module or application module will be used.
•If an Æ LDAP server is used, enter the name of the LDAP template file that is used in connection with this server.
•The file must exist in a defined directory on the Æ FTP server (Æ FTP Server Address).
•Standard name Æ page 96.
•Datei downloaden Æ Action On Submit
Æ page 50
LED Test
•Conduct this test to check the function of the Æ LED in the optiPoint 410/420 zu prüfen.
•All the LEDs blink during the test.
Æ page 25
Line Status
•Activate the display to view the functions and values used to run the Æ LAN connections in the optiPoint 410/420.
•Bit rate, activity, half / full duplex, as well as the status of the used net- work or the manual setting in the optiPoint 410/420.
•The display takes place through the Æ LEDs of the right row:
Port[ | Function | LEDs on optiPoint 410/420 (right row) | ||
[1]] |
|
|
|
|
PC | Activity | LED1 | Not Active | Active |
| Speed | LED2 | 10 Mbit/s | 100 Mbit/s |
| Duplex | LED3 | ||
| (no function) | LED4 | - | - |
LAN | Activity | LED5 | Not Active | Active |
| Speed | LED6 | 10 Mbit/s | 100 Mbit/s |
| Duplex | LED7 | ||
| (no function) | LED8 | - | - |
[1] See Æ page 12. |
|
|
|
•The status monitor remains active even during the normal operation of the optiPoint 410/420. However, it does not affect the operation of the function keys.
Æ page 28
72