3-20 ROLMphone 300/600 Series User Guide
Community (Com) Group Speaker Call
Community (Com) Group Speaker Call lets you make a two-way call
to the speaker of another telephone in your community (com) group by
dialing a short code instead of an extension. If the party you are calling
does not have a speakerphone, they must pick up the handset to
answer.
If the party being called picks up the handset, the call is converted to a
regular call. If the party being called is busy, you will receive a busy
tone.
This feature is much like the Two-Way Speaker Call feature, except
that the party you are calling must be a member of your community
(com) group. (See “Two-Way Speaker Call” on page 3-33.)
For more information about com groups, see “Community (Com)
Group Call” on page 3-19.
To make a com
group speaker
call
➩Press the Intercom (INTRCOM) key, or get
a dial tone and dial * * 6.
➩Dial the member’s com code.
➩You will hear the confirmation tone. The
other party’s telephone will beep twice.
➩Begin speaking. If the other party does not
have a speakerphone, they must pick up the
handset to answer. You and the other party
will hear repeated intrusion tones until they
pick up the handset or you hang up.
If you are a member of a com group and want to make intercom calls
to the same member often, you can set up an auto intercom repdial key.
To do this, set up a repdial key with the Intercom feature access code
(* * 6) followed by the com code of another member in your group.
(See “Repertory Dialing (Repdial)” on page 3-25.)