3-36 ROLMphone 300/600 Series User Guide
Station Speed Dialing
The Station Speed Dialing feature lets you assign frequently used
dialing sequences to codes for easy dialing.
You can assign dialing sequences to each of ten single-digit codes (0
through 9). You can then dial a single-digit code instead of dialing the
entire sequence.
On Version 6.3 and higher, you can also be set up at the
communications server for up to 30 codes, in groups of 10. If you are
set up for more than ten, they follow a double-digit scheme (00 through
29).
A dialing sequence can be an extension, an outside number, a feature
access code (or feature key that you press as part of the sequence), or
a combination of numbers and feature access codes and can include up
to 22 characters. A feature key entered into a sequence counts as three
characters.
Station speed codes are not line dependent; you can set them up or dial
them from any line on your telephone.
To set up a
station speed key
on a display
telephone
➩Press the Program key. The Program status
light turns on. PRESS FEATURE KEY OR
DIAL CODE is displayed.
➩Press the Station Speed (SPEED) key, or
dial # # 3. SPEED DIAL is displayed.
➩Enter the Station Speed code you want to
set up (0 through 9, or 00 through 29 if you
are set up for more than 10 codes).
Either the dialing sequence or NOTHING
STORED is displayed. (You can view the
contents of other codes by entering those
codes now.)
➩Wait until NEW NUMBER? is displayed.