Gigaset 3070/3075isdn, GB, | giga3070KAP.fm | 09.01.01 |
Connecting a PC to the base station
Step
by
Step
Operating Gigaset talk&surf with Windows 98, Win ME
Registering Gigaset M105 Data at Gigaset 3070/3075isdn
Proceed as follows:
1.Install Gigaset M105 Data
2.Start the Gigaset M105 Data configuration program via > Start > Programs > Gigaset M100 Data > Gigaset Setup.
3.Select the window "Local adapter“, a free registration location is selected.
4.Check that your Gigaset M105 Data has been set to the type Portable part (default).
5.Set the Gigaset 3070/3075isdn to registration mode (press LED).
6.Click the Register button and enter the PIN of the partner station (default 0000).
7.Click OK. The registration procedure starts and the message "If the re- quired base is ready for registration, the local adapter logs on. Check that the base is ready for registration." appears on the screen.
The two devices are automatically synchronised. An entry now appears in the Registered adapter list.
8.Close the program with OK.
9.Restart your computer.
Once Gigaset M105 Data has been installed, the telephony driver for your Gigaset 3070/3075isdn has to be updated. You have three op- tions here:
1.You have not yet operated your Gigaset 3070/3075isdn on your PC via the USB cable:
You must follow the instructions in the sections "PC connection via USB" and "Installing Talk&surf Software" in the PC installation instruc- tions provided with Gigaset 3070/3075isdn. When asked which port is to be used for accessing Gigaset 3070/3075isdn, specify the virtual COM port for Gigaset M105 Data.
2.You have operated Gigaset 3070/3075isdn on your PC via the USB ca- ble before:
Install the talk&surf software again. Start the installation procedure for the talk&surf software and when asked which port is to be used for
accessing Gigaset 3070/3075isdn, specify the virtual COM port for Gi- gaset M105 Data* and continue with the installation.
3.You have operated your Gigaset 3070/3075 isdn on your PC via the USB cable before and you are an experienced PC user:
Reset the telephony driver by selecting the following: > Start > Set- tings > Control Panel > Telephony. Select the Telephony Drivers tab here. Then select the DECT/ISDN TAPI Service Provider and click on Configure. Click on Port, then on Serial and select the virtual COM port for Gigaset M105 Data (see footnote on page 15). Confirm twice with OK and then Close.
14
